Quick answer: vacuum the chair first, check the cleaning code on the tag under the seat, then spot-clean with the matching method — a few drops of mild dish soap in warm water for most mesh and “W” fabrics, a leather cleaner for real leather. Use as little liquid as possible, blot instead of scrubbing, and let the chair dry fully before you sit on it.
An office chair you sit in eight hours a day collects dust, skin oils, crumbs and the occasional coffee spill. Cleaning it every few months keeps it fresh and helps the materials last. The right method depends on what your chair is covered in, so start by working out which type you have.
What you need
- A vacuum with an upholstery or brush attachment (or a lint roller)
- Mild, clear dish soap and warm water
- Two or three microfibre cloths
- A soft brush — an old soft toothbrush works for mesh and seams
- For leather: a pH-balanced leather cleaner and conditioner
- Optional: baking soda for odours, a can of compressed air
Step 1: Check the cleaning code
Most upholstered chairs have a care tag under the seat or on the back of the frame with a one- or two-letter cleaning code. These codes are an upholstery-industry convention (Sailrite explains them here):
- W — clean with water-based cleaners (mild soap and water).
- S — solvent-based cleaners only; keep water off it.
- W/S or WS — either water- or solvent-based cleaners.
- X — vacuum or brush only; no liquid cleaners at all.
No tag? Follow the manufacturer’s care page for your model, or treat the fabric as delicate: vacuum, then test a tiny amount of soapy water on a hidden spot before cleaning anything visible.
Step 2: Vacuum everything
Vacuum the seat, backrest and armrests with the upholstery or brush attachment, paying attention to the seams and the gap between the seat and backrest, where crumbs collect. Do this before any wet cleaning — otherwise you just turn dust into mud.
How to clean a mesh office chair
- Vacuum both sides of the mesh with a brush attachment, or use compressed air to blow dust out of the weave.
- Mix a few drops of mild dish soap into a bowl of warm water.
- Dip a microfibre cloth or soft brush, wring it out well, and wipe the mesh in small sections. Avoid soaking it.
- Wipe again with a cloth dampened in plain water to remove soap residue.
- Let it air-dry completely before use.
Mesh is breathable and dries quickly, but scrubbing hard can stretch or fray the weave. Gentle, repeated passes work better than force.
How to clean a fabric office chair
- Confirm the code is W or WS.
- Blot fresh spills immediately with a dry cloth — never rub.
- Mix warm water with a little dish soap and whisk to make suds. Apply mostly the foam with a cloth, working from the outside of a stain toward the centre.
- Blot with a clean damp cloth to lift the soap, then blot dry with a dry towel.
- Let it dry fully; a fan speeds things up. Too much water can soak into the foam underneath and leave water rings or a musty smell.
For “S” fabrics, use a solvent-based upholstery cleaner labelled for that code and follow its instructions with the room well ventilated. For “X”, stick to vacuuming and brushing — or call a professional upholstery cleaner.
How to clean a leather or faux leather chair
Real leather: wipe with a cloth barely dampened in mild soapy water or use a pH-balanced leather cleaner, wipe off residue, dry, then apply a leather conditioner every few months to stop it drying out and cracking. Don’t use household all-purpose sprays, alcohol or bleach.
Faux leather (PU, vinyl or “bonded leather”): wipe with mild soapy water and dry straight away. Skip oil-based leather conditioners, which are made for real hide. Peeling on bonded leather is a material failure that cleaning won’t fix. Not sure which material suits you? See mesh vs leather office chairs.
How to clean office chair wheels
Hair and fluff wrapped around the casters make a chair drag and can scratch floors.
- Tip the chair on its side on a towel.
- Pull or cut away hair and threads with tweezers or small scissors.
- Wipe the wheels and base with a damp, soapy cloth, then dry.
- Many casters pull straight out of the base for a deeper clean — check your chair’s manual before forcing one.
If the wheels are cracked or still won’t roll smoothly, replacements are cheap and easy to fit — see our guide to replacement caster wheels. A chair mat also keeps casters (and floors) cleaner.
How to get rid of office chair smells
For odours in fabric, vacuum first, sprinkle a light layer of baking soda, leave it for a few hours (or overnight), then vacuum it off thoroughly. Test on a hidden spot first, and don’t use this method on code “X” fabric if the tag says brushing only. For mesh, a wipe with mild soapy water usually handles it.
What not to do
- Don’t soak the seat — water trapped in foam causes rings, odours and mould.
- Don’t use bleach, ammonia or harsh solvents unless the cleaning code and the product label say they’re safe.
- Don’t steam-clean without checking the code and the manufacturer’s advice.
- Don’t spray lubricant into the gas cylinder or take it apart. If your chair keeps sinking, read how to fix a sinking office chair.
How often should you clean an office chair?
A quick vacuum and wipe every couple of weeks, plus a deeper clean every three to six months, is enough for most home offices. While you’re at it, your keyboard probably needs attention too: how to clean a mechanical keyboard.
FAQ
Can I use a carpet cleaner or steam cleaner on my office chair?
Only if the cleaning code allows water (W or WS) and the manufacturer doesn’t advise against it. Use as little moisture as possible and let the chair dry completely.
How do I clean a mesh chair without a vacuum?
Use a lint roller or a soft brush to lift dust, compressed air for the weave, then wipe with a well-wrung cloth dipped in mild soapy water.
How long does an office chair take to dry?
Mesh usually dries within an hour or two. Fabric seats with foam can take several hours; good airflow or a fan helps.
Can I put the seat cushion in the washing machine?
Only if it has a removable cover with a washing label that says so. Most office chair seats are upholstered directly onto foam and must be spot-cleaned.

Pingback: How to Fix a Sinking Office Chair: 4 Fixes That Work